CNC Pipe Making Machine | |
1.Stably operation,professional | |
2.High precision | |
3.Flame and plasma | |
4.Specialized in pipe cut | |
CNC Pipe Making Machine: | |
1.Charge on the cut in several different directions and different diameters of cylindrical holes intersecting line to meet the head of the axis of branch pipe axis and eccentricity of the eccentric and non-perpendicular conditions. | |
2.Branch ends in intersecting line cutting cylinder ends to meet the branch head of the axis of the eccentric axis and eccentricity of the vertical and non-intersecting, sloping intersection conditions. | |
3.Cut the pipe end can be inclined cutting face. | |
4.Can cut the pipe welded on the elbow, "shrimp festival" at both ends of oblique cut surface. | |
5.Intersects with the circular cutting head to the branch ends intersecting line. | |
6.Variable angle to cut the groove surface. | |
7.Can cut the pipe square hole on the waist-shaped hole. | |
8.Steel can be cut off. | |
Technical datda: | |
Diameter of steel pipe | 60mm-600mm |
Cutting length | 13mm(Can be lengthened as user's demand) |
Effective cutting length | 12mm |
Drive motor | Stepper motor |
Plasma power source | MAX85(effective cutting thickness is 10mm,max cutting thickness is 16mm |
Plasma cutting torch | 1 set |
Automatic ignition | 1 set |
Drive software | 1 set |
Nesting software | FASTCAM INTEGNPS,SMARTNEST |
Voltage | 380V/220V 50Hz 500-1000W |
Cutting speed | 0-3500mm per minute |
Moving precision | 0.01mm/step |
Drawing software | AutoCAD |
Torch height | 230mm |
Speed error | + --0.05 |
Weight | 4.2T |
Measure | 3.8CBM |
Sea freight(Bandar abbas) | USD 250(LCL) , USD 2000(FCL) |
Profile Cutting Machine